Sanremo D8 - Technical User Menu Overview; Accessing the Technical User Menu; Technical Menu

D8
Technical user menu
42
TECHNICAL USER MENU
8 TECHNICAL MENU
8.1 ACCESSING THE TECHNICAL
USER MENU
To access the user menu, press the but-
ton K5 on the group GR1 and then the
button K8, or press and hold the button
K5 on the group GR1 for more than 10
seconds.
The LEDs of group GR1 light up clockwi-
se and then anti-clockwise to indicate
that access was performed.
At the end of this phase the machine
enters a stand-by status, waiting for the
selection by the user.
The mini-display shows an animation to
indicate that the machine is ready.
The LEDs L6 and L7 flash alternately.
8.1.1 TECHNICAL USER MENU
OVERVIEW
 Boiler temperature setting (only if
enabled in the technical menu, de-
fault OFF)
 Group temperature setting (only if
enabled in the technical menu, de-
fault OFF)
 Pre-infusion enabling (only if
enabled in the technical menu, de-
fault OFF)
ß Single doses
ß Double doses
 Setting of the number of available
doses
ß 5 doses (default)
ß 7 doses
 Manual K5 dose enabling as pro-
grammed dose
 Enabling of Purge function on ma-
nual button K5