Sanremo D8 - Cleaning the Drain Plate; Automatic Cleaning; Single Group Automatic Washing

D8
Service and maintenance
51
9.2.7 CLEANING THE DRAIN PLATE
To clean the drain plate, proceed as fol-
lows:
- clean the connections to the drain with
a brush.
9.3 AUTOMATIC CLEANING
The automatic cleaning is divided into:
- single group automatic washing. It is
activated from the single group to be
cleaned;
- automatic washing of all groups. It is
activated from the first group GR1 and
starts the cleaning of all groups, one at
a time in a sequential manner.
IMPORTANT
After starting, the automatic
washing cannot be terminated
before it is completed.
If the machine is switched off
during an automatic washing,
the machine will be locked at
start-up until the washing is
finished.
9.3.1 SINGLE GROUP AUTOMATIC
WASHING
The single group washing can be termi-
nated by pressing any button.
The cycles includes 15 washings.
To activate the automatic washing of a
single group, proceed as follows:
- press the buttons K5 + K1
to start the group washing.
The other groups not washed will
continue to operate normally.
During the washing phase, the mini-di-
splay shows the indication “CL” (wa-
shing phase with detergent) alternately
with the phase number.
Each screen lasts 2 seconds.