D8
Disposal
56
DISPOSAL
12 DISPOSAL OF THE
MACHINE
IMPORTANT
Empty the boiler before
disposing of the machine.
All the operations for machine
disposal must be carried out by
a technical service centre.
12.1 DISPOSAL
The crossed-out bin symbol on the equi-
pment or its packaging indicates that
the product must be collected separately
from other waste at the end of its service
life.
PRODUCT COMPLYING WITH EU
DIRECTIVE 2012/19/EU.
At the end of the service life of the de-
vice, before disposing of it separately,
make it inoperative: unplug the device
and cut off the power cable.
The device and its accessories must be
disposed of in accordance with the re-
gulations in force in the country in which
they are being used.
Adequate separate collection for the
subsequent recycling, treatment and en-
vironmentally compatible disposal of the
waste equipment helps to avoid possible
adverse effects on the environment and
health and promotes the reuse and/or
recycling of the materials of which the
equipment is composed.
IMPORTANT
Unlawful disposal of the
product entails the application
of the administrative penalties
provided for by the legislation
in force.
Any irregularities committed by
the Customer before, during or
after scrapping and disposal of
the machine components, and
in interpreting and applying the
regulations in force, is the sole
responsibility of the Customer.
12.2 DISPOSAL OF HARMFUL
SUBSTANCES
To dispose of these substances, refer to
the regulations in force in the country of
use and proceed accordingly.
To Next Page
Loading...
