D8
Service and maintenance
52
- Press any button to end washing.
9.3.2 AUTOMATIC WASHING OF ALL
GROUPS
The automatic washing has been deve-
loped so that it can be performed both
on only one group at a time, and star-
ted even if you have only one blind filter,
and on all groups at the same time.
The cycles includes 15 washing and 15
rinsing operations.
To activate the automatic washing of all
groups, proceed as follows:
- press the buttons K5 + K4 at the same
time for at least 5 seconds on the
group GR1.
The LEDs L5 of all groups will start to fla-
sh.
The mini-display shows the indication
“CL”.
5 sec.
- Press K5 to start the washing phase on
the chosen group or all groups.
To Next Page
Loading...
