Sanremo D8 - Page 53

D8
Service and maintenance
53
During the washing phase, the mini-di-
splay shows the indication “CL” (wa-
shing phase with detergent) alternately
with the phase number.
Each screen lasts 2 seconds.
At the end of the cycle the LED L5 flashes.
The mini-display shows the indication
“rS”.
- Remove the detergent;
- press the button K5 to start the rinsing
phase.
During the rinsing phase, the mini-display
shows the indication “rS” (rinsing phase)
alternately with the phase number.
- Press any button to prevent washing
(except K5) on the group on which you
do not want to perform the automatic
washing.
After starting the automatic washing on
a group, it cannot be terminated before
it is completed.
If the machine is switched off during an
automatic washing, the machine will be
locked at start-up until the washing is fi-
nished.