Sanremo D8 - Pre-Infusion; Purge; Steam Dispensing; Thermal Hazard

D8
Operation
39
7.3 PRE-INFUSION
The machine is delivered with the pre-in-
fusion function disabled.
The pre-infusion can be enabled for sin-
gle, double or both dispensing opera-
tions.
To enable pre-infusion, see “8.5 Pre-infu--
sion setting” page 46.
7.4 PURGE
The machine is delivered with the purge
function enabled.
To start the purge, proceed as follows:
- press the button K5 to start the purge
∙ press once to perform the purge
(spout automatic cleaning with
20ml of water);
∙ press twice for continuous
dispensing.
7.5 STEAM DISPENSING
To use steam, proceed as follows:
- insert the steam wand (1) into the jug
containing the drink to be heated;
- turn the knob (2) anti-clockwise. Adjust
the steam flow as needed by turning
the knob more or less;
- at the end of the drink heating, stop
steam dispensing by turning knob (2)
clockwise;
- remove the jug from the steam wand
(1);
- immediately clean the steam wand
(1) from any residues using a damp
sponge.
2
1
THERMAL HAZARD
In order to prevent the risk
of burns, do not operate the
steam dispensing knob before
inserting the steam wand into
the jug.