D8
Operation
41
To switch off the group GR2 or GR3 or
to set them to ECO mode, proceed as
follows:
- Simultaneously press the buttons K5
and K3 on the group concerned.
The group switches off.
The LED L3 flashes slowly.
The mini-display shows the indication
“OF” for 10 seconds.
- Simultaneously press the buttons K5
and K3 on the group concerned.
The group concerned sets to ECO mode.
The LED L3 flashes quickly.
The mini-display shows the indication
“EC” for 10 seconds.
- Press the button K3 on the group
concerned to switch it on.
You can always reactivate the machine
or the individual group by pressing K3.