Sanremo D8 - Page 58

D8
Malfunction causes and solutions
58
PROBLEMS CAUSES SOLUTIONS
Autosteamer not working
Wand probe breakage (does
not froth and heat the drink and
the Autosteamer button panel
LEDs are flashing)
Call the technical servi-
ce
Cold tea water Incorrect mixed water setting Set mixed water
Coffee is too cold
Machine not ready
Wait for the temperatu-
re to be reached
Presence of limescale in the boi-
ler
Call the technical servi-
ce
The machine does not
dispense hot water
Machine not ready
Wait for the temperatu-
re to be reached
Faulty dispensing solenoid val-
ve
Call the technical servi-
ce
Clogged dispensing ducts
Call the technical servi-
ce to perform a limesca-
le removing cleaning
Coffee is not dispensed
or is dispensed too
slowly
Insufficient water supply Check the supply line
Clogged filter holder dispensing
hole
Clean the filter holder
thoroughly with specific
detergent or using a to-
othpick
Excessively fine grinding
Possible generation of error
AL70 on the group display
Adjust the grinder do-
sing device
Coffee is not dispensed
Group solenoid valve malfun-
ction
Call the technical servi-
ce
Group gigleur clogging (pro-
bable limestone)
Call the technical servi-
ce
The machine does not
dispense steam
Clogged dispensing nozzle Clean
Clogged dispensing ducts
Call the technical servi-
ce to perform a limesca-
le removing cleaning
Faulty steam tap
Call the technical servi-
ce