SPA-100 OPERATION MANUAL
16 / 67
The "PORT1" and "PORT2" optical connectors on the front panel and the "POWER
MONITOR" optical connectors on the rear panel output laser light of intensity and
wavelength according to the laser source used. Take the same safety measures as
the laser source used.
Also, the maximum input power to this product is 10dBm. Inputting light with a
power exceeding 10 dBm may cause damage to internal components. In particular,
when using it together with TSL-570 Type H, please be careful about the
power setting of TSL.
To Next Page
Loading...
