SPA-100 OPERATION MANUAL
54 / 67
7.3 Installing the DAQmx Driver
To communicate with the SPA-100, the NI-DAQmx driver must be installed.
Download the driver installer from the National Instruments official website
I can. Installation may require administrator privileges.
1. Download the installer from the National Instruments official website.
https://www.ni.com/ja-jp/support/downloads/drivers/download.ni-
daqmx.html#288272
Or
https://www.ni.com/en-us/support/downloads/drivers/download.ni-daq-
mx.html#288272
Figure 7-5 Downloading the Driver
To Next Page
Loading...
