SPA-100 OPERATION MANUAL
50 / 67
7. Installing the software
7.1 Operating conditions
This software has been tested in the following environment.
Operation in environments other than the following is not guaranteed.
OS: Windows 10 64bit, Windows 11
Driver versions:
NI-488.2 Version 17.6 to 2023 Q3
NI DAQmx Version 17.6 to 2023 Q3
7.2 Installing the NI-488.2 Driver
To communicate with G PIB, the NI-488.2 driver must be installed.
Download the driver installer from the National Instruments official website
I can. Installation may require administrator privileges.
1. Download the installer from the National Instruments official website.
https://www.ni.com/ja-jp/support/downloads/drivers/download.ni-488-
2.html#306147
or
https://www.ni.com/en-us/support/downloads/drivers/download.ni-488-
2.html#467646
To Next Page
Loading...
