Sanyo PLC-XU305A - Page 54

54
Standby mode
Thisfunctionisavailablewhenoperatingtheprojectorvia
network.
 Network.... Supplythepowertothenetworkfunctioneven
afterturningofftheprojector.Youcanturnon/
off the projector via network, modify network
environment, and receive an e-mail about
projectorstatuswhiletheprojectorispowered
off.
 Eco............ SelectEcowhenyoudonotusetheprojector
via network. The projector’s network function
willstopwhenturningofftheprojector.
Refertotheowner’smanual“NetworkSet-upand
Operation”.
Note:
•Factorydefaultis
Network.
•Whenselecting
Network,thecoolingfansmayberunning
dependingonthetemperatureinsidetheprojectorevenif
theprojectoristurnedoff.
Setting
On start
When this function is set to On, the projector will be
automatically turned on just by connecting theAC power
cordtoawalloutlet.
Note:
 Besuretoturnofftheprojectorproperly(see"TurningOff
the Projector" on page 22). If the projector is turned off
intheincorrectsequence,theOnstartfunctiondoesnot
workproperly.
Closed caption
Closedcaptionisaprintedversionoftheprogramsoundor
otherinformationdisplayedonthescreen.Iftheinputsignal
containsclosedcaptions,youcanturnonthefeatureand
switchthechannels.PressthePoint▲▼buttonstoselect
Off,CC1,CC2,CC3orCC4.
Iftheclosedcaptionis notclear, youcanchangethetext
fromColortoWhite.
Closed Caption
Note:
TheClosedCaptionisavailableonlyunderthesituation
below.
•WhentheinputsignalisNTSCofcompositeand
S-video,andthesystemissetaccordingtothesignal
orseton
Auto.
  •Thesystemmustbeseton
NTSCorAutoinVideo
SystemSelection.(P.41)
  •TheiconofClosedcaptionisdisplayedingraywhileit
isnotavailable.
  •TheClosedcaptionisunavailablewhenOn-Screen
menuandP-Timeraredisplayed.
PressthePoint▲▼buttonstoselect
Off,CC1,CC2,CC3orCC4,and
thenPressSELECTbutton.