English 44
3 Press the shutter release button all the way.
h The images is captured.
NOTE
About the focus icon and target mark
i The target mark outlines the area that the camera is using to focus. If the
area outlined by the target mark is not the subject you want to focus on,
then refocus your subject, for example by changing the shooting angle.
i The target mark does not appear in the following situations.
When the subject is not in focus
When using the self-timer to take a picture (see page 57)
When the focus is set to spot focus (see page 88)
When the focus is set to focus range (see page 61)
When the Scene Select function is enabled (see page 51)
i When the camera focuses on a wide area of the central part of the screen,
a large target mark appears.
If the motion alert icon appears...
i During still image shooting, if the shutter
speed is slow and the possibility that the
image may be blurred due to camera
movement becomes high, the motion
alert icon may appear on the LCD
monitor. In this case, use a tripod to sta-
bilize the camera when shooting, or set
the flash operation mode to automatic
(see page 65).
Motion alert icon
Shutter speed
To Next Page
Loading...
Need help?
General
