130
Factory Settings
Automatic storage: Off
Minimum load for automatic storage:
10 digits
Source of data for auto storage:
Application 1
Evaluated values: Net
Evaluation mode, MR key function:
Intermediate
evaluation, print
M+/M– function, then tare: Off
Printout of individual components:
Yes
Stability range: 2 digits
Application-defined output: Print on
request then tare:
Off
Soft Key Functions
M+ Add weight values or
application values to the
total in the totalizing
memory. The component
or transaction counter
value increases by one
each time you press
this key.
M- Delete the last value
added to memory. The
transaction counter value
decreases by 1. You
cannot delete previous
values by repeatedly
pressing this key.
MR Print or display an
intermediate or final
evaluation
nDef Store the input number
of components
Printout of Statistics
The transaction or component counter
is printed in front of each measured
value (weight). When an intermediate
or final evaluation is printed out, all
results up to this point are included.
n5
Total + 151.67 g
Avg. + 33.0 pcs
s + 3.2 pcs
srel + 9.70 %
Total + 165 pcs
Min + 29 pcs
Max + 37 pcs
Diff + 8 pcs
n: Transaction counter
Total: Sum of all values
Mean: Average
s: Standard deviation
srel: Variation coefficient
Total: Sum of all values
Min: Minimum
Max: Maximum
Diff: Difference between minimum
and maximum
To Next Page
Loading...
Need help?
General