18
Setup – Application 1 Differential weighing Weighing sequence* Individual weighing
Application (Basic settings) Consecutive individual weighing
o Combined weighing
Serial weighing
Tare weighing No
o Yes
Result with None
decimal point 1 decimal place
o 2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
Autosave values o Off
On, first value at stability
On, last value at stability
On, value bet.
70–130 % at stabil.
Minimum load None
for autosave o 10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Save statistics o No
Yes
Generate printout None
o Automatic after backweighing
Auto. after initial weigh.
and backweighing
Automatic after tare-, initial-
and backweigh.
Include sample ID o No
in text line Yes
Wg. seq key No
o Yes
Clear sample after o No
individual weight, Yes
result + and unload
Last residual weight is o No
stored as initial weight Yes
(ashing)
Applications 2 and 3 – see following pages
Factory setting
* = Setting can only be changed when the program is initially run and when the Wg.seq. key option is set to “No”
To Next Page
Loading...
