Sartorius Factory Series User Manual

19
Configuring the Scale: FC
Setup – Application 1 – see previous page
Application
menu Application 2 o Off
(Control
functions) Checkweighing Activation of port lines o Within check range
Always on
Stability and check range
At stability
Stability + check range -> on
Type of checkweighing o Target, min, max weight
input Min, max weight
Target, min in %, max in %
Weight display mode o Absolute value
Difference from target
Automatic printout Yes
of OK values o No
Time-controlled Function after time Beep (acoustic signal)
functions interval Lock-in readout
o Automatic printout
Store value in App. 3 memory
Automatic function o On
restart Off
Stability-dependent o Without stability
storage mode After stability
After increased stability
Tare after printout Off
o On
Application 3 o Off
(Data records)
Totalizing Automatic storage o Off
On, first value at stability
On, last value at stability
On, value 70% –130% at stab.
Minimum load for None
automatic storage o 10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1,000 digits
Source of data for auto storage – see next page
Formulation – see next page
Application 3 through – see following pages
Basic Settings
Menu Level 1
Menu Level 2
Menu Level 3
Menu Level 4
Factory setting
Factory setting

Sartorius Factory Series Specifications

General

Brand	Sartorius
Model	Factory Series
Category	Scales
Language	English