25
Configuring the Scale: FC
Practical Example
Adapt the scale to ambient conditions of “extreme vibration.”
Step Key (or instruction) Display/Output
1. Select Setup M
2. Select the scale menu Press the Menu
soft key
3. Confirm selection of scale Press the O soft key
function menu
4. Confirm selection of filter Press the O soft key
adaptation menu item
5. Menu level 3: Press the q soft key twice
Select the desired item
6. Confirm selection Press the l soft key
7. Set other menu codes, if desired o q Q O soft keys
8. Confirm setting and exit Setup oo soft key
To Next Page
Loading...
