Sartorius Sartocheck 4 plus - Page 22

22 Installation
5.6.2 Sartocheck
®
4 plus Sartocheck
®
4 Bag tester MultiUnits are connected to the Sartocheck
®
4 plus Filter
Filter tester MultiUnits tester MultiUnit or to the Sartocheck
®
4 plus Bag tester via the serial port TU
connection ports. Different ways of connecting are shown below in Fig. 5-14 to 5-17.
The location of the Sartocheck
®
4 Bag tester MultiUnits, relative to the Sartocheck
®
4 plus Filter tester or to the Sartocheck
®
4 plus Filter tester MultiUnit, will determine
which method is best suited for the application.
Fig. 5-14 | Serial connection to a Bag tester
Fig. 5-15 | Serial connection to a Filter tester