Satec System 295 - Page 141

Appendix B Programmable Parameters 133
Table B-4b Analog Output Parameters
Parameter Unit Range/scale À
Group Code Name
Á
Zero Full
U 2 Voltage L2/L23 V 0 Vmax
U 3 Voltage L3/L31 V 0 Vmax
cur1 Current L1 A 0 Imax
cur2 Current L2 A 0 Imax
cur3 Current L3 A 0 Imax
Ac.P1 kW L1 kW -Pmax Pmax
Ac.P2 kW L2 kW -Pmax Pmax
Ac.P3 kW L3 kW -Pmax Pmax
rE.P1 kvar L1 kvar -Pmax Pmax
rE.P2 kvar L2 kvar -Pmax Pmax
rE.P3 kvar L3 kvar -Pmax Pmax
AP.P1 kVA L1 kVA 0 Pmax
AP.P2 kVA L2 kVA 0 Pmax
AP.P3 kVA L3 kVA 0 Pmax
PF1 Power factor L1 n/a -1.00 1.00
PF2 Power factor L2 n/a -1.00 1.00
PF3 Power factor L3 n/a -1.00 1.00
th.U1 Voltage THD L1/L12 % 0 100.0
th.U2 Voltage THD L2/L23 % 0 100.0
th.U3 Voltage THD L3 % 0 100.0
th.C1 Current THD L1 % 0 100.0
th.C2 Current THD L2 % 0 100.0
th.C3 Current THD L3 % 0 100.0
HFc.1 K-Factor L1 n/a 1.0 999.9
HFc.2 K-Factor L2 n/a 1.0 999.9
HFc.3 K-Factor L3 n/a 1.0 999.9
Ar.to
Average total values
Ac.P Total kW kW -Pmax Pmax
rE.P Total kvar kvar -Pmax Pmax
AP.P Total kVA kVA 0 Pmax
PF Total PF n/a -1.00 1.00
PF.LG Total PF Lag n/a 0 1.00