Satec System 295 - Page 142

134
Appendix B Programmable Parameters
Table B-4b Analog Output Parameters
Parameter Unit Range/scale À
Group Code Name
Á
Zero Full
PF.Ld Total PF Lead n/a 0 1.00
Ar.Au
Average auxiliary measurements
Au.C Auxiliary current mA/A 0 Iaux max
nEU.C Neutral current A 0 Imax
FrEq Frequency  Hz 0 100.0
U.Unb Voltage unbalance % 0 300
C.Unb Current unbalance % 0 300
dnd
Present demands
Ud. 1 Volt demand L1 V 0 Vmax
Ud. 2 Volt demand L2 V 0 Vmax
Ud. 3 Volt demand L3 V 0 Vmax
Ad. 1 Ampere demand L1 A 0 Imax
Ad. 2 Ampere demand L2 A 0 Imax
Ad. 3 Ampere demand L3 A 0 Imax
Ac.bd Block kW demand (import) kW 0 Pmax
rE.bd Block kvar demand (total) kvar 0 Pmax
AP.bd Block kVA demand kVA 0 Pmax
Ac.Sd Sliding window kW demand
(import)
kW 0 Pmax
rE.Sd Sliding window kvar demand
(total)
kvar 0 Pmax
AP.Sd Sliding window kVA demand kVA 0 Pmax
Ac.td Thermal kW demand (import) kW 0 Pmax
rE.td Thermal kvar demand (total) kvar 0 Pmax
AP.td Thermal kVA demand kVA 0 Pmax
Ac.Ad Accumulated kW demand
(import)
kW 0 Pmax
rE.Ad Accumulated kvar demand
(total)
kvar 0 Pmax
AP.Ad Accumulated kVA demand kVA 0 Pmax
Ac.Pd Predicted kW demand (import) kW 0 Pmax
rE.Pd Predicted kvar demand (total) kvar 0 Pmax
AP.Pd Predicted kVA demand kVA 0 Pmax
hr.U1
L1/L12 phase harmonic voltages (odd harmonics)