Operating The PM295 49
To quit the sub-menu:
Ä From the central window, press ENTER to return to the upper window.
Viewing and Changing a Setpoint Action
Each action sub-menu displays the action type and action target for one of four
setpoint actions. To enter a sub-menu, select in the upper window one of entries
Act1 to Act4 with the up/down arrow keys, then press SELECT. The following
pictures illustrate the sub-menu windows.
To view the action parameters:
Ä From the central window, scroll through the list of parameters with the up/down
arrow keys. The lower window will display the current parameter setup.
Act1
tYPE
rEL
Action
type
Act1
tArG
rEL.1
Action
target
For applicable action types and their appropriate targets, refer to Table B-9 (see
Appendix B). To specify setpoint actions, refer to Section 4.17.5.
To change the action type:
Ä From the central window, select the tYPE entry with the up/down arrow keys.
Ä Press SELECT to choose the lower window.
Ä Scroll through the applicable actions with the up/down arrow keys until the
desired label appears.
Ä Press ENTER to return to the central window.
To change the action target:
Ä From the central window, select the tArG entry with the up/down arrow keys.
Ä Press SELECT to choose the lower window.
Ä Scroll through the applicable choices with the up/down arrow keys until the
desired label appears.
Ä Press ENTER to return to the central window.
To Next Page
Loading...
