Satel GSM-X - Page 38

36 GSM-X SATEL
Fig. 33. Switching between primary and backup communication path by using “FLASH
prefix”.
PAGER station number – the number after dialing of which by a device connected to the
telephone line output the module will simulate the pager station. The further part of the
dialed number will be treated as the cellular telephone number to which the PAGER type
message will be sent in the form of SMS message. The pager station number can consist
of up to 16 digits.
The programmed number must be unique and must not coincide with any other
number programmed in the module.
CLIP standard (tel. line) – the module offers the caller identification feature. The following
options are available:
 - [function disabled];
 FSK;
 DTMF.
The telephone number may contain up to 16 digits.