Satel INTEGRA - Page 47

INTEGRA SATEL
45
Entering this code on the electric lock keypad or execution of access by means of
a proximity card or DALLAS chip will generate the “User Access" type of event. When
the guard has the authority of access to partitions, the partitions may be controlled in
much the same way as with using the Normal type of code (calling function in LCD
keypad: [CODE][
*
]).
Entering the guard code, or using the guard card/DALLAS chip on the equipment
assigned to the partition, in which the guard round is programmed, will start the time
countdown to the next guard round from the beginning.
The installer defines the keypads with the use of which the guard should enter his code
when making his rounds in the protected facility, and sets the maximum time interval
between subsequent guard rounds. The time interval between guard rounds is
determined for each partition individually, and also separately when the partition is
armed and disarmed.
It is possible to plan the guard rounds only for one of the above situations (for example,
when the partition is armed). Missing guard round will generate the “No guard" event
which may be signaled at one of control panel outputs.
11. Schematic – code allowing the user to get access to the system according to a time
scheme. One of the eight time schemes as may be defined by the installer should be
assigned to such a code. The access scheme is based on 64 system timers. The user
can control the system only when one of the particular scheme timers is active. Also,
duration of the actual code must be set (0–254 days) – entering 0 will set an indefinite
duration (until canceled).
Rights list indicates which functions are available to the user. The available list of rights is
limited by the authority level of the user who has called the U
SERS
function: the user being
added / edited may not be granted higher authority than that of the person adding / editing
the user.
The list of all rights which can be assigned to the new user includes:
- Arming
- Disarming
- Can always disarm
- Partition alarm clearing
- Object alarm clearing
- Other alarm clearing
- Voice messaging clearing
- Arm deferring
- Entering first code
- Entering second code
- Access to blocked partitions
- Code changing
- Users editing
- Zones bypassing
- Clock setting
- Troubles viewing
- Events viewing
- Zones reset
- Options changing
- Test