SATO CL6NX - Environmentally Hazardous Materials

21
Environmentally Hazardous Materials
RoHS Directive
This printer restricts the use of the six hazardous materials listed below, as specified by RoHS
directive.
Hexavalent chromium Max. 0.1%
Lead and lead compounds Max. 0.1%
Mercury and mercury compounds Max. 0.1%
Cadmium and cadmium compounds Max. 0.01%
Polybrominated biphenyls (PBB) Max. 0.1%
Polybrominated diphenyl ethers (PBDE) Max. 0.1%
Compliance Status of REACH Regulation
(1) Status of registered chemical substances
No chemical substances are intentionally emitted, nor are there any chemical substances that are
registered with the European Chemicals Agency.
(2) Information about the Substances of Very High Concern (SVHC) contained in the printer
As of August 3, 2015, there has been no information communicated regarding SVHC that exceed
0.1% of the printer's weight. In the future, if SVHC that exceed 0.1% of the printer's weight are
found, we will immediately communicate that information.