SATO CL6NX - [Network]

253
External I/O
Set the external signal (EXT).
◦ Appears only if the combo interface board is installed.
RFID
Set the RFID. (CL4NX only)
◦ Appears only for the RFID model.
[Network]
To use LAN and wireless LAN for the interface between the host and the printer.
The setting items are as follows:
Settings
Set the LAN or wireless LAN, or select the interface.
Services
Set the TCP/IP port number, NTP, LPD, FTP, SNMP, or SOS (SATO Online Services).
Advanced
Set the advanced function for the interface.