SATO CL6NX User Manual

633
• Because the KEYENCE barcode checkers (BL-1301, SR-710) use an RS-232C
connection, an optional scanner connection cable is required.
• When replacing media or ribbon, remove the barcode checker stand kit from the
printer. When doing this, first turn the switch of the magnetic base stand to OFF and
remove the barcode checker stand. For details on how to use the barcode checker
stand, refer to the Barcode Checker Stand Kit Installation Manual.
Changing How the RS-232C Interface is Used (When Using the KEYENCE Barcode
Checkers)
When using one of the KEYENCE barcode checkers (BL-1301, SR-710), modify the barcode
checker's operational settings so that it can communicate with the printer, and then connect it to
the printer. After connecting the barcode checker to the printer, change the [Interface] setting of
the RS-232C interface to [RS-232C Reader] on the printer. With this setting, the printer can detect
the barcode checker and automatically connect with it according to the barcode checker's interface
settings.
1.
After connecting the barcode checker, press the power button on the operator
panel until the LED lights up in blue to power on the printer.
2.
When the printer is in Online mode, press the button on the operator panel to
change to Offline mode.
3.
Press the button to show the [Settings] menu.

SATO CL6NX Specifications

General

Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Cables included	AC
Maximum roll diameter	220 mm
Maximum printing width	167.5 mm
Printing media thickness	0.08 - 0.268 µm
USB port	Yes
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Wi-Fi	No
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	338 mm
Height	321 mm
Weight	20000 g