[Barcode Checker]
478
2. Insert the USB memory into the USB connector (Type A).
3. Go to the [Settings] > [Tools] > [Certificates] menu.
4. Select the certificate you want to install. Refer to the item description above.
5. Select the certificate file from the list.
[Barcode Checker]
Set the barcode check function.
By connecting a barcode checker to the printer, you can check the barcodes after printing.
The setting items are as follows:
Test
Set up the barcode checker.
◦ Available only if you have connected the barcode checker.
Settings
Set the barcode check function.
To Next Page
Loading...
