SATO CL6NX - Page 259

259
[IPv6]
Set the IPv6 for the LAN.
The setting items are as follows:
Mode
Select the IP address assignment method or disable IPv6.
DHCP / Renew Lease
Update the lease time and get the IP address from the DHCP server again.
◦ Appears only if you have selected [DHCP] in the [Mode] menu.
◦ Does not appear if the wireless LAN is the active interface.
IP Address
Set and check the IP address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the IP address you received
from the DHCP server.
If you have selected [Static] in the [Mode] menu, select to set the IP address.
Prefix Length
Set and check the prefix.
Gateway
Set and check the default gateway address.
If you have selected [DHCP] in the [Mode] menu, the screen shows the gateway address you
received from the DHCP server.
If you have selected [Static] in the [Mode] menu, select to set the default gateway address.
DNS
Set and check the address of the primary DNS server.
If you have selected [Static] in the [Mode] menu, select to set the primary address of the DNS
server.