SATO CL6NX - Page 271

271
•
After doing the settings, return to the [Wi-Fi] screen by pressing the button, and
then press the button to enable the new settings. Press the button
to cancel the new settings and return to the previous settings.
• When [Wi-Fi Direct] is active, this [IPv6] screen does not appear. In addition, you
cannot change [IP Address], [Prefix Length], [Gateway], or [DNS] if [Mode] is anything
other than [Static].
[Mode]
Select the IP address assignment method or disable IPv6.
The options are as follows:
Disable
Disable IPv6.
Auto
Automatically generate the IP address and gateway (stateless mode).
DHCP
Automatically retrieve the IP address and gateway from the DHCP server (stateful mode).
Static
Manually set the IP address, gateway and prefix length.