SATO CL6NX - Page 288

[Network]
288
[EAP Mode]
Set the EAP Mode (authentication mode).
The options are as follows:
• [FAST]
• [LEAP]
• [PEAP]
• [TLS]
• [TTLS]
[Inner Method]
Set the inner method.
Appears only if you have selected [FAST], [PEAP], or [TTLS] in the [EAP Mode] menu.
• If you have selected [FAST] in the [EAP Mode] menu, the options are [MSCHAPv2], [GTC], and
[TLS].
• If you have selected [PEAP] in the [EAP Mode] menu, the options are [MSCHAPv2], [GTC],
[MD5], [OTP], and [TLS].
• If you have selected [TTLS] in the [EAP Mode] menu, the options are [MSCHAPv2], [MSCHAP],
[CHAP], [PAP], [EAP-GTC], [EAP-MD5], [EAP-MSCHAPV2], [EAP-OTP], and [EAP-TLS].