SATO CL6NX - Page 314

[Network]
314
[Read-Write]
Set the read-write function.
The setting items are as follows:
SNMP Version
Set the SNMP version.
Community
Set the read-write community name.
◦ Appears only if you have selected [1|2c|3] or [1|2c] in the [SNMP Version] menu.
User
Set the read-write user name.
◦ Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
User Security
Set the read-write security level.
◦ Appears only if you have selected [1|2c|3] or [3] in the [SNMP Version] menu.
Authentication Protocol
Set the authentication protocol.
◦ Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
Authentication Passphrase
Set the authentication passphrase.
◦ Appears only if you have selected [Authentication] or [Privacy] in the [User Security] menu.
Privacy Protocol
Set the privacy protocol.
◦ Appears only if you have selected [Privacy] in the [User Security] menu.