SATO CL6NX - Page 348

[RS-232C]
348
[Baudrate]
Set the baudrate (bps).
Available to change only if you have selected [RS-232C] in the [Interface] menu.
The options are as follows:
• [2400]
• [4800]
• [9600]
• [19200]
• [38400]
• [57600]
• [115200]
[Parameters]
Set the data parameters.
Available to change only if you have selected [RS-232C] in the [Interface] menu.
The options are as follows:
Refer to the table below for the parameter configurations.