377
Set the length of an RFID error pulse.
Appears only if you have selected [Pulse] in the [Output Error Mode] menu.
The options are as follows:
• [100 ms]
• [200 ms]
• [300 ms]
• [400 ms]
• [500 ms]
[Counters]
Shows the RFID counter.
The display items are as follows:
Lifetime
Shows the number of encoding successes, failures, and total attempts.
User
Shows the number of encoding successes, failures, and total attempts after the RFID counter is
cleared.
To Next Page
Loading...
