39
Print Job Status
Icon Description
Waiting for media removal. Remove the media.
Ribbon is near the end. The rest of the ribbon is decreased. Prepare a new
ribbon.
Label is near the end. The rest of the media is decreased. Prepare new media.
Command error detected. Check the print data.
Receive buffer is nearly full. Wait until the printer starts printing the previously sent
data, and then send the next data.
Defective print head is detected. Replace the print head.
Incompatible print head is detected. Replace the print head.
Maintenance Status
Icon Description
Clean the print head or platen roller.
To Next Page
Loading...
