SATO CL6NX - Page 422

[SDPL]
422
Disabled
Disable the pause mode.
[1 Byte Codepage]
Select the code page to be used for one-byte characters from the list.
You can change this setting only if you have selected [Settings] in the [Prioritize] > [1 Byte Codepage]
menu.
[SDPL Measure Unit]
Set the measurement unit.
You can change this setting only if you have selected [Settings] in the [Prioritize] > [SDPL Measure
Unit] menu.
The options are as follows:
• [Inch]
• [Millimeter]