SATO CL6NX - Page 471

471
• Normally, it is not necessary to perform the initialization. Doing so could change the
print conditions.
[Data & Settings]
Initialize the data and setting values of the printer.
Select the items to be initialized.
The options are as follows:
User Reset
Initialize the data and setting values.
User Reset (-Interface)
Initialize the data and setting values, except the [Interface] menu.
Factory Reset
Initialize to the status of the factory shipment.
Factory Reset (-Interface)
Initialize to the status of the factory shipment, except the items in the [Interface] menu.
Interface
Initialize the data and setting values in the [Interface] menu.
Printing
Initialize the data and setting values in the [Printing] menu.