Contents of the Check for Readable Mode and Comparison Mode
642
• A reading error occurs if the number of barcodes in the print data is not read within the printing
period from start to finish and the timeout period (up to 2 seconds).
Comparison mode
This mode checks if the read results of the printed barcodes match the barcode data in the print data.
• The reading is considered to be successful if the read results of the printed barcodes match the
barcode data in the print data. The printer prints the next label.
• A comparison error occurs if the read results of the printed barcodes do not match the barcode
data in the print data.
To Next Page
Loading...
