SATO CL6NX - Page 750

Hardware
750
Item CL4NX CL6NX
Printable Area
203 dpi
Length 2500 mm (98.42")
x Width 104 mm (4.09")
305 dpi
Length 1500 mm (59.05")
x Width 104 mm (4.09")
609 dpi
Length 400 mm (15.75")
x Width 104 mm (4.09")
203 dpi
Length 2500 mm (98.42")
x Width 152 mm (5.98")
305 dpi
Length 1500 mm (59.05")
x Width 165.3 mm (6.50")
When Head Base Position is set
to Left-justify
maximum print width
167.5 mm (6.59")
Print End Position
203 dpi (1 dot = 0.125 mm
(0.0049"))
1 to 20000 dots
305 dpi (1 dot = 0.083 mm
(0.0033"))
1 to 18000 dots
609 dpi (1 dot = 0.042 mm
(0.0017"))
1 to 9600 dots
203 dpi (1 dot = 0.125 mm
(0.0049"))
1 to 20000 dots
305 dpi (1 dot = 0.083 mm
(0.0033"))
1 to 18000 dots
Print Darkness
Darkness level
1 to 10
Darkness range
A
Sensors
Item CL4NX CL6NX
I-mark (Reflective
Type)
Position and sensitivity
Adjustable
Gap (Transmissive
Type)
Position and sensitivity
Adjustable
Head Open Fixed
Paper End Sensor Detect with I-mark sensor or Gap sensor