SATO PW208NX - Page 10

Safety Precautions
7
Mobile printer PW208NX/PW208mNX
CAUTION
■ Replacing the Battery Pack
• Use only the specied battery pack.
• When replacing the battery pack, make sure to install the pack in the correct
orientation. Incorrectly replacing the battery creates the danger of injury or damage
to surrounding areas, or causes explosion.
• Replace with a small-size rechargeable battery (Lithium ion battery). Apply insulation
treatment to the old battery pack by sealing the contact with tape or the like and ask
our sales representative or service center for the measures to be taken to recycle
the reusable materials.
Do not place the battery pack together with other batteries such as dry batteries.
• The life expectancy of the lithium ion battery pack varies depending on usage. We
recommend that you replace the battery after 300 charge cycles or 3 years from the
date of rst use, whichever comes rst.
• If you notice any dents or cracks on your battery crust caused by strong impacts or
shocks, stop using the battery immediately and replace it with a new one.
Continued use under these conditions may lead to abnormal overheating or re.
■ Loading media
• When loading media roll, be careful not to get your ngers pinched between the media roll
and the supply unit.
■ Top cover
• Be careful not to get your ngers pinched when opening or closing the top cover. Also be
careful the top cover does not slip off and drop.
■ When not using the product for a long time
• When not using the product for a long time, unplug the AC adapter from the outlet to maintain
safety.
■ During maintenance and cleaning
• When maintaining and cleaning the product, remove the battery pack from the product and
unplug the AC adapter from the outlet to maintain safety.