SATO PW208NX - Tools Menu

108
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
2.6.6 Tools Menu
In the Tools menu, the setting items are as follows:
Tools
1 Test Print Perform a test print.
2 HEX-Dump Set the HEX-Dump mode and how to manage the received
buffer data and log les.
3 Reset Initialize printer settings.
4 Service These are the setting items for service. Strictly for SATO
authorized service personnel use.
5 Factory These are the setting items for service. Strictly for SATO
authorized service personnel use.
6 Wi-Fi Site
Survey
Make a survey of the wave strength for each access point
and display or print the survey results.
Test Print
Tools > Test Print
To perform a test print, the setting items are as follows:
1 BD Address
Perform the BD Address test print with QR code and
Code 39.
2 Factory Perform the factory test print.
3 Congure List Print the conguration information of the printer.
4 Congure QR Print the conguration information with a QR code.
5 Paper Sensor Print the wave form of media sensor level.