SATO PW208NX - Details of the Settings Menu Screen; Printing Menu

50
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
2.6 Details of the Settings Menu Screen
2.6.1 Printing Menu
In the Printing menu, the setting items are as follows:
Printing
1 Label Length Set the length of media.
2 Label Width Set the width of media.
3 Auto Measure
When enabled, the length of media is measured
automatically.
4 Speed Set the maximum print speed.
5 Print Mode Set the print mode.
6 Sensor Type Set the media sensor type.
7 Peeling Setting
(PW208NX only)
Set the peeling motion in the Dispenser mode.
8 DarknessRng Set the range of the print darkness.
9 Darkness Set the print darkness.
10 Imaging
Set the print reference position in the vertical and
horizontal directions.
11 Advanced Set the sensor operation and print motion.
Note
The printer uses the unit of dot to set the length and size of print
reference position. One dot length is 0.125 mm.
Label Length
Printing > Label Length
Set the length of media.
Initial value : 1760 dots
Setting range : 1 to 8000 dots
Note
Set the label size to a value that includes the liner.
Label Width
Printing > Label Width
Set the width of media.
Initial value : 440 dots
Setting range : 1 to 440 dots
Note
Set the label size to a value that includes the liner.