142
Mobile printer PW208NX/PW208mNX
6.1 Printer Specications
6 Basic Specications
Model Name PW208NX PW208mNX
Print Method Direct Thermal
Head Density (Resolution) 8 dots/mm (203 dpi)
Effective Printable Area Maximum Length 1000 mm (39.4”) × Width 55 mm (2.2”)
Print Speed 3 inches to 6 inches/sec
75 mm to 152 mm/sec
(In Dispenser, Linerless Mode: Maximum 4 inches (102 mm)/sec)
Values may vary with print layout, ambient temperature, or remaining battery
level.
Non-printable Area Continuous, Dispenser
Pitch Direction Top: 1.5 mm (0.06”), Bottom: 1.5 mm (0.06”)
(Excluding liner)
Width Direction Left: 1.5 mm (0.06”), Right: 1.5 mm (0.06”)
(Excluding liner)
Linerless
Pitch Direction Top: 4 mm (0.2”), Bottom: 1.5 mm (0.06”) (Excluding liner)
Width Direction Left: 1.5 mm (0.06”), Right: 1.5 mm (0.06”)
* That may affect print quality. Avoid printing on the non-printable area.
Print Mode Continuous, Tear-off, Dispenser,
Linerless
Continuous, Tear-off, Linerless
Dimensions/Weight Width 95 mm (3.7”) × Depth 68.2 mm
(2.7”) × Height 128 mm (5”) /
Approximately 444 g (15.7 oz) (Including
a battery)
Width 95 mm (3.7”) × Depth 55.5 mm
(2.2”) × Height 109.5 mm (4.3”)
/ Approximately 374 g (15.7 oz)
(Including a battery)
Power Supply Input Voltage : 100 to 240 V AC
50 Hz-60 Hz (AC adapter)
Output voltage : DC10 V +10% - 0%
1.9 A (DC Symbol
)
AC adapter (Optional) : ATS018T-A100
(Adapter Technology Co., LTD. )
Battery Specications Lithium-ion Battery
Nominal Voltage : 7.2 V
Nominal Capacity : 1950 mAh
Charge-discharge Cycle : Approximately 300 charge cycles or 3 years from
the date of rst use, whichever is earlier.
Charging Time : Approximately 3 hours*
Operating conditions : Continuous printing time 2 minutes. / Resting time
6 minutes.**
* The charge-discharge cycle and charging time may vary depending on
usage environment.
** The continuous printing time and resting time may vary depending on
usage environment.
6