SATO PW208NX - Battery Charging Procedures

14
Mobile printer PW208NX/PW208mNX
Before You Start
1.2.1 Inserting the Battery
1
Open the battery cover.
Slide the lever of the battery cover (

).
Open the battery cover (

).
Power off the printer before inserting or removing the battery.
1.2 Charging the Battery
2
Insert the battery.
Insert the battery from the metal side.
3
Close the cover.
Close the battery cover (

).
Slide the lever of the battery cover with the
battery cover pressed shut (

).
②
①
②
①
Before using the printer, use the following charging device to charge the supplied battery.
• AC adapter: “1.2.2 Charging with AC Adapter (Optional)” (

page 15)
• Charging cradle: “1.2.3 Charging with Charging Cradle (Optional)” (

page 15)
• Battery charger: “1.2.4 Charging with Battery Charger (Optional)” (

page 18)
• An AC adapter (Optional) and Charging cradle (Optional) are for this printer only. It must not be used
with any other electric device. If an AC adapter other than the specied one is connected to this printer, it
may cause a malfunction. Do not use it.
• If the battery has not been charged for a long period of time, it may become unusable. Charge the
battery regularly.