SATO PW208NX - Page 16

Before You Start
13
Mobile printer PW208NX/PW208mNX

DC input connector (AC power connector)

USB connector

NFC internal antenna

Charging terminal for a Charging Cradle (Optional)
When the printer is shipped from the factory, a
black protective seal labeled “CRADLE ACCESS”
is afxed to the terminal. When using a cradle to
charge the printer, remove this seal.

Platen roller (Consumables)

Media sensors

Media guide (PW208NX only)

Cutter

Print head (Consumables)

Interface cover
PW208mNX
* The platen roller feeds the label roll.
The print head prints on the label roll.
Perform maintenance regularly, as these parts are for printing. (

page 141)
ケガに注意
• The cutter has the blade edge. Be careful not to get cut your nger.
PW208NX
⑪
⑫
⑮
⑭
⑬
⑱
⑳
⑲
⑰
⑯
⑪
⑮
⑭
⑫
⑱
⑰
⑯
⑳
⑲
Bottom
Bottom