SATO PW208NX - Charging with AC Adapter (Optional); Charging with Charging Cradle (Optional)

Before You Start
15
Mobile printer PW208NX/PW208mNX
1.2.2 Charging with AC Adapter (Optional)
1.2.3 Charging with Charging Cradle (Optional)
1
Connect the AC adapter (Optional).
Open the interface cover.
Connect the DC plug to the printer and the AC
power plug to the AC outlet.
* The shape of power plug varies depending on
the region.
1
Remove the black protective seal labeled “CRADLE
ACCESS” afxed to the bottom of the printer.
2
Charging starts.
During charging, do not power off the printer.
For details on the display during charging, see
“Icon” (

page 23).
There are two types of charging cradles: 1Bay Charging Cradle for charging one printer, and 4Bay Charging
Cradle for charging four printers simultaneously (

page 140).
This section describes how to use the 1Bay charging cradle to charge the printer.
AC power plug
AC adapter
DC plug
Interface cover
Protective seal