SATO PW208NX - Loading Printer Media

16
Mobile printer PW208NX/PW208mNX
Before You Start
3
Connect the printer to the charging cradle.
Align the projections of the charging cradle with
the indentations on the front of the printer (

),
and then move the printer slowly downward and
set it on the charging cradle (

).
4
Charging starts.
For details on the display during charging, see “Icon” (

page 23).
Note
Notes when you use the printer being set on the charging cradle
• Set Full Charge P-Off (

page 89) to Disabled.
• Enabling the Eco Charge function (

page 88) is recommended to increase the life of the battery.
• When using the printer set on the charging cradle, you cannot power off the printer during charging. To
power off the printer, set the time so that Auto Power-Off (

page 104) operates or remove the printer from
the charging cradle.
2
Connect the supplied AC adapter to the
charging cradle.
Connect the DC plug to the charging cradle and
the AC power plug to the AC outlet.
* The shape of power plug varies depending on
the region.
Removing the printer from the charging cradle
Remove the printer while holding the Release button on the
charging cradle pressed.
• Place the charging cradle in a location where it won’t be exposed to water drops. If a terminal gets wet, it
could cause a re or electric shock.
DC plug
AC power
plug
AC adapter
Release button