SATO PW208NX - Loading the Media

Before You Start
19
Mobile printer PW208NX/PW208mNX
1.3 Loading the Media
1
Open the top cover.
Push the cover open button (

).
Open the top cover (

).
If the media is difcult to load, rewind the
media roll so that the two ends of the roll
become even.
3
Load the media.
Load the media so that the surface touches
the print head.
4
Close the top cover.
Close the cover so that it clicks shut.
2
Adjust the media guide. (PW208NX only)
Push up the lever (

).
Adjust the media guide to the media size (

).
When you release the lever, the media guide is
xed.
②
①
①
②
②
• When loading the media, be careful not to get cut your nger with the cutter.
Use only the supply products specied by SATO.
Before use, check the printer operations with the media to be used.
Note
Eject the media in the direction illustrated.