SATO PW208NX - Media Specifications

Basic Specications
147
Mobile printer PW208NX/PW208mNX
6.2 Media Specications
Model Name PW208NX PW208mNX
Media Type/Media Form Media Type : Roll (Face-out)
Dimension : Φ60 mm (2.4”) maximum
Core : No
* Use only the supply products specied
by SATO.
Media Type : Roll (Face-out)
Dimension : Φ35 mm (1.4”) maximum
Core : No
* Use only the supply products specied
by SATO.
Media Size Continuous
Length : 13 mm (0.5”) to 160 mm (6.3”)
(16 mm (0.6”) to 163 mm
(6.4”))
Width : 25.4 mm (1.0”) to 55 mm (2.2”)*
(28.4 mm (1.1”) to 58 mm
(2.3”))
*
When the Print Speed is set to
5 or 6 inch/sec, use the media
of 50 mm or wider.
Tear-off
Length : 16 mm (0.6”) to 160 mm (6.3”)
(19 mm (0.7”) to 163 mm
(6.4”))
Width : 25.4 mm (1.0”) to 55 mm (2.2”)*
(28.4 mm (1.1”) to 58 mm
(2.3”))
*
When the Print Speed is set to
5 or 6 inch/sec, use the media
of 50 mm or wider.
Dispenser
Length : 25 mm (1.0”) to 160 mm (6.3”)
(28 mm (1.1”) to 163 mm
(6.4”))
Width : 32 mm (1.3”) to 55 mm (2.2”)
(35 mm (1.4”) to 58 mm (2.3”))
Linerless
Length : 16 mm (0.6”) to 120 mm (4.7”)
Width : 50 mm (2.0”) to 58 mm (2.3”)
( ): Inches (”) are displayed in
dimensions.
* ( ): Liner size is included.
* ( ): Liner size is included.
* For Linerless media, you should make
the proper settings of the printer to
match your print layout conditions. For
details, contact your SATO reseller or
technical support center.
Continuous
Length : 13 mm (0.5”) to 160 mm (6.3”)
(16 mm (0.6”) to 163 mm
(6.4”))
Width : 55 mm (2.2”)
(58 mm (2.3”))
Tear-off
Length : 16 mm (0.6”) to 160 mm (6.3”)
(19 mm (0.7”) to 163 mm
(6.4”))
Width : 55 mm (2.2”)
(58 mm (2.3”))
Linerless
Length : 16 mm (0.6”) to 120 mm (4.7”)
Width : 58 mm (2.3”)
( ): Inches (”) are displayed in
dimensions.
* ( ): Liner size is included.
* For Linerless media, you should make
the proper settings of the printer to
match your print layout conditions. For
details, contact your SATO reseller.