SATO PW208NX - List of Initial Value; Printing Menu

122
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
2.7 List of Initial Value
Setting options Initial Setting/Value User Reset Factory Reset
Label Length 1760 dots
○ ○
Label Width 440 dots
○ ○
Auto Measure Disabled
○ ○
Speed 4 ips (inches/sec)
○ ○
Print Mode Tear-Off
○ ○
Sensor Type
PW208NX: I-Mark
PW208mNX: None
○ ○
Peeling Setting (PW208NX only) – – –
Backfeed Before
○ ○
Sensor Type I-Mark – –
Darkness Range A
○ ○
Darkness 5
○ ○
Imaging – – –
Vertical 0 dot
○ ○
Horizontal 0 dot
○ ○
The initial value refers to the setting value of the printer when it was shipped from the factory.
If you reset the printer, the setting values of the printer change back to the factory default values.
The tables below show the initial value of each setting item and type of reset that changes the value back to
the initial value.
2.7.1 Printing Menu
It is generally not necessary to perform the initialization.
Initialization may change the print conditions.