SATO PW208NX - Page 124

Starting Up the Printer
121
Mobile printer PW208NX/PW208mNX
Main
Information > Sensor Module > Main
Shows the information about the main rmware of this printer as follows:
1 Name Shows the Main rmware name.
2 Release Date Shows the Main rmware release date.
3 Checksum Shows the Main rmware checksum.
Counters
Information > Counters
Shows the counter information of this printer as follows:
1 Print head Shows the head counter information of this printer.
Head
Information > Counters > Head
Shows the head counter information of this printer.
1 Life Shows the current print distance.
2 Head 1 Head 1 shows the current print distance.
When you replace the print head, the head counter of
Head 1 is transferred to Head 2 and Head 1 starts to
count from 0 again.
3 Head 2
4 Head 3
Active printing
Information > Active Printing
Shows the setting information of the active printing operations as follows:
1 Print Mode Shows the current Print Mode.
2 Sensor Type Shows the type of media pitch sensor being used.
Wi-Fi Direct
Information > Wi-Fi Direct
Shows the connection information of the Wi-Fi Direct only if the printer is connected to
the Wi-Fi Direct.
1 SSID Shows the SSID.
2 Role
Shows the Wi-Fi Direct connection status with the
following item:
GO: Group Owner
3 Device Address Shows the device address.
4 IP Address Shows the IP Address.
5 Passphrase Shows the passphrase.